Return to Home

Avionics and Space Instruments

Features of Avionics and Space Instruments

  • Signal recovery & Decommutation.
  • For all Flight Test Instrumentation needs.
  • Works with any PCM Encoders.
  • Typical uses are Flight checkout & Flight inline checkout.
  • Desired to provide portable ground stationcompatibility.
  • Small and light weight.
  • Support of base trail activities.
  • GDS Mate Software Compatible

Read More >>     Comments >>     Request for Quote >>

USB Range Products

USB Range Products

1.Model 8767-3 USB Series Multi-Function Receiver, Bit Synchronizer and Decommutator

  • Provides a multiple function USB powered product comprising a tunable S-Band or L-Band PCM/FM Telemetry Receiver combined with a Bit Synchronizer and Decommutator
  • The APK8767-3 can be operated as:
    • Combined Receiver, Bit Synchronizer and Decommutator
    • Receiver and Bit Synchronizer
    • Bit Synchronizer and Decommutator
    • Bit Synchronizer
    • PCM Decommutator
  • Provides clock and data recovery from a received serial PCM data stream over a Bit Rate range extending from 15000 BPS to 10 MBPS
  • Receiver Frequency, Bit Rate and Frame Format set up through a USB 2 Port by a host PC
  • Provides Decommutates data transfer to the host PC through the same USB 2 Port
  • Processes PCM Codes including NRZ, RNRZ and Bi-Ø codes
  • RS422 Data and Clock Inputs
  • IRIG B Time Code Reader
  • Stand alone Decommutator Option
  • Supports IRIG 106 Frame Formats
  • Set-Up information and Frame Format stored in non-volatile memory

Deliverables:

  • Model 8767-3 USB Series Multi-Function Receiver, Bit Synchronizer and Decommutator
  • A simple Stub Test Antenna is provided
  • Supplied with GDSmate Set up, display, archiving and export software
  • Standard Input Output Connectors with mates.

Read More >>     Comments >>     Download Datasheet >>


USB Range Products

2.Model 8766 USB Series Receiver with Analogue Baseband Output

  • L-Band, Upper L-Band, S-Band or 400 MHz Band Tunable Receiver
  • Provides a baseband analogue output signal
  • Provides an Automatic Gain Control output voltage proportional to the received signal strength
  • Programmable Centre Frequency
  • Programmable Deviation Sensitivity
  • Programmable Baseband Filter cut off frequency
  • Programmed through the USB connection to a host Windows PC
  • Programming GUI software provided
  • Powered from the Host PC through the USB2 port
  • Ready LED indicates that the unit is programmed and ready for operation
  • Signal Strength Lock Indicator threshold set to -70 dBm as standard. Other settings available
  • Rugged Construction
  • Wide operating temperature range

Deliverables:

  • 4.Model 8766 USB Series Receiver with Analogue Baseband Output
  • A simple Stub Antenna
  • Standard Input Output Connectors
  • Supplied with GUI based Set Up Software to enable selection of:
    • Centre Frequency
    • Deviation Sensitivity
    • Baseband Output Signal amplitude
    • Baseband Filter -3dB cut off frequency

Read More >>     Comments >>     Download Datasheet >>

 


USB Range Products

3. Model 8762 USB Series PCM Bit Synchronizer

  • Provides clock and data recovery from a received serial PCM data stream over a Bit Rate range extending from 1500 BPS to greater than 10 MBPS
  • Processes PCM Codes including RNRZ, NRZ and Bi-Ø codes
  • Unique Apollotek signal recovery Analogue and Digital design implementation
  • Programmable Bit Rate
  • Programmable loop bandwidth
  • Programmable Tracking Range
  • The Bit Synchronizer is set up and monitored through the USB port using the Apollotek GDSmate Telemetry Environment Software Package
  • Bit Synchronizer Lock and Status LED displays
  • Standard Telemetry input and output interfaces and special electrical and optical interfaces are available
  • Compatible with the Apollotek USB Decommutator series

Deliverables:

  • Model 8762 USB Series PCM Bit Synchronizer
  • Standard Input Output Connectors
  • Set-up utility provided with the APK8762 Bit Synchronizer
  • Optional: Apollotek GDSmate Telemetry Environment Software package

Read More >>     Comments >>     Download Datasheet >>


USB Range Products

4.Model 8763 USB Series Bit Synchronizer and Decommutator

  • Provides clock and data recovery from perturbed serial PCM data over a bit rate range from 1500 BPS to greater than 10 MBPS
  • Includes a PCM Decommutator which transfers data to a host PC through a USB 2 Port
  • Processes all PCM Codes including RNRZ, NRZ and Bi-Ø codes
  • RS422 Data and Clock Inputs
  • RS422 Data and Clock Outputs
  • IRIG B Time Code Reader
  • Wide operating temperature range
  • Rugged Construction
  • Powered from Host PC
  • Lock and Status Indicators
  • Supports IRIG 106 Frame Formats
  • Frame Format stored in non-volatile memory
  • Supports SFID & FCC
  • Supplied with single stream GDSmate software providing:
  • Raw Data Archiving to Disk
  • Graphical Data Displays
  • Tabular Data Displays
  • Engineering Unit Conversions
  • Post Processing File Outputs

Deliverables:

  • Model 8763 USB Series Bit Synchronizer and Decommutator
  • GDSmate Telemetry Environment Software package
  • Standard Input Output Connectors

Read More >>     Comments >>     Download Datasheet >>


USB Range Products

5.Model 8761 USB 2 Series PCM Telemetry Decommutator

  • USB 2 connection to Host PC
  • Powered from Host PC
  • TTL Data and Clock Inputs
  • RS422 Data and Clock Inputs
  • IRIG B Time Code Reader
  • Greater than 10 MBPS Bit Rate Operation for real time archiving to disk without data loss – Host PC performance dependent
  • Lock and Status Indicators
  • Frame Format stored in non-volatile memory when powered down
  • Displays Lock Status of Stored Frame Format when externally powered and not connected to a USB Host
  • Wide operating temperature range
  • Rugged Construction
  • Supports IRIG 106 Frame Formats
  • Supports SFID, FAC & FCC
  • Supplied with single stream host PC GDSmate software providing:
  • Control of Raw Data Archiving to Disk
  • Graphical Data Displays
  • Tabular Data Displays
  • Engineering Unit Conversions
  • Data Export in common file formats

Deliverables:

  • Model 8761 USB 2 Series PCM Telemetry Decommutator
  • Apollotek GDSmate Telemetry Environment Software Package.
  • Standard Input Output Connectors

Read More >>     Comments >>     Download Datasheet >>


USB Range Products

6.Model APK 8764 USB PCM Simulator

  • USB Interface to a host PC for Set Up and Power
  • PCM Simulation to greater than 20 MBPS
  • Large on-board FLASH Memory
  • Very Long Frame Capability with low frequency Dynamics
  • Complex Sub-Frame Capability
  • Super-Commutation
  • Sub-Commutation
  • Embedded Stream Generation
  • Generates Programmable Dynamic Parameters including:
  • Sine, Square, Ramp and Step
  • Fixed Word Value
  • Common Word Value
  • External Data Insertion facility
  • TTL Data and Clock Outputs
  • RS422 Data and Clock Outputs
  • Compatible with the Apollotek GDSmate Telemetry Environment Software package
  • Common set up screen for setting up the simulator and the Apollotek range of USB PCM Decommutator

Deliverables:

  • Model APK 8764 USB PCM Simulator
  • Apollotek GDSmate Telemetry Environment Software package

Read More >>     Comments >>     Download Datasheet >>


USB Range Products

7.Model APK 8768 USB PCM Simulator and Transmitter

  • USB Interface to a host PC for set up and power
  • PCM Simulation to > 10 MBPS
  • Large on-board Flash Memory
  • Very Long Frame Capability with low frequency Dynamics
  • Complex Sub-Frame Capability
  • Super-Commutation
  • Sub-Commutation
  • Embedded Stream Generation
  • Generates Programmable Dynamic Parameters including:
  • Sine, Square, Ramp and Step
  • Fixed Word Value
  • Common Word Value
  • TTL Data and Clock Outputs
  • Nominal 100 mW RF Transmitter output frequency modulated with the Simulated PCM Bit stream
  • Customer specified L-Band, S-Band, NATO E-Band or 400 MHz band programmable transmitter centre frequency

Deliverables:

  • Model APK 8768 USB PCM Simulator and Transmitte
  • Apollotek GDSmate Telemetry Environment Software package
  • Standard Input Output Connectors
  • A simple Stub Antenna
  • Optional: Rechargeable battery pack.

Read More >>     Comments >>     Download Datasheet >>


PCM Encoders

USB Range Products

Features of PCM Encoders

  • Programmable System PCM Bit Rates up to 20 MBPS
  • Stand Alone and Distributed Master / Multiple Slave Configurations
  • IRIG 106 Compliant
  • Modular Construction
  • Available in various chassis sizes from 4 to 32 slots
  • Designed for severe environments
  • Configured from a family of Input Modules matched to common Transducer types and measurement requirements
  • Analogue, Digital, Frequency and Storage Modules available
  • Integral Solid State Recorder Modules with USB download port can be installed in the encoder chassis
  • Programmable Constant Current and Constant Voltage Transducer Excitation is provided on selected Modules
  • Programmable Gain
  • Programmable Offset
  • Programmable Cut Off Filters
  • Pre-modulation filter for RF Telemetry applications
  • Compatible with Apollotek Telemetry Transmitters
  • The Encoder is programmed through a PC USB Port

Deliverables:

  • ApolloDas 8600 Series Modular PCM Encoder
  • Apollotek GDSmate Telemetry Environment Software package
Read More >>     Comments >>     Download Datasheet >>

Solid State Recorders

USB Range Products

ApolloDas 8700-FD Series Solid State Recorder

  • Rugged Modular Construction
  • Designed for Ship borne and Airborne applications
  • 28 Volts 4 Volts DC Power as standard other options available
  • Records and Replays a serial data stream
  • Optional IRIG 106 PCM and Clock data input interface - TTL or RS422
  • Compatible with the output of the ApolloDas 8600 PCM Encoder System
  • Data Rates in excess of 10 MBPS can be recorded
  • External Recording Start and Stop Control
  • Up to 32 GBytes of non-volatile storage can be provided in one chassis.
  • Solid State Recorder emulates a Windows Disk Drive
  • Embedded CPU runs Windows XP Operating System
  • Compatible with the Apollotek GDSmate Telemetry Environment Software Package
  • A serial USB Port is provided for high speed data downloading into a host PC
  • An Ethernet Port is also provided for remote access control and data download
  • A standard external PC Monitor can be connected to set up and control the Recorder

Deliverables:

  • ApolloDas 8700-FD Series Solid State Recorder
  • GDS mate Telemetry Environment Software Package

Read More >>     Comments >>     Download Datasheet >>